Ps4 safe mode how to#
Ps4 safe mode update#
Ps4 safe mode software#
Ps4 safe mode Ps4#

Keep the can upright to prevent any moisture from going into your console.

Make sure to keep it about 1-2 inches from the vent.

Point the nozzle of the compressed air at the vents.

To clean up your PlayStation 4 properly, here’s what to do.

Having one will help protect your console when it’s not in use. If you notice build-up on your PS4, you may need to look into getting a dust cover.

Some homes are more prone to dust than others. Dust and clean your PlayStation 4 consoleĭust and grime buildup will cause system errors for your console if you let it get bad enough. If your PlayStation is still starting in safe mode after selecting “Restart PS4” continue below for more options.

If it still loads into safe mode attempt to use the menu option of “Restart PS4”.

Plug the cable back in and turn on your console.

Leave it unplugged for a minimum of 20 minutes.

Shut down your PlayStation with the Power Button or menu option to avoid the “PlayStation was not shut off properly” error code.

Have you tried unplugging it and plugging it back in? If your PlayStation boots back into safe mode with this option, your console is still experiencing issues. Using this option will shut down your PlayStation and attempt to start it in the normal boot-up mode. “Restart PS4” looks like it might reset your console’s memory, but I promise it won’t.

If your PlayStation boots back into Safe Mode after following these steps, you’ll need to continue further down this article to test another repair option.

Connect your controller to your PlayStation’s USB port.

There you have it! If your PlayStation is experiencing any issues that can’t be solved in the normal startup, or it isn’t booting normally, you can use safe mode to find more solutions.Īny of the options below will help you get out of safe mode.

Press the PS button on the center of the controller.

Press and hold the power button until you hear two beeps: one when you first press and another seven seconds later.Ĭonnect your DualShock 4 controller with the USB cable. If your USB ports aren’t working, you will need to get them fixed before attempting this step. After you start your console in safe mode, you will need to sync your controller through a USB port.

Ps4 safe mode Ps4#

Note: Do not attempt to launch your PS4 in safe mode if your USB ports are not working.

Ps4 safe mode how to#

If you’ve already tried one of them before finding this article feel free to check out any of the other options! How to launch Safe Mode Here’s a list of all the options you’ll see inside of this article.

Connect your control to your PS4 through the USB charging cable, push the home button, and it should lead you to eight safe-mode options.Ĭlick on the option that says “Initialize PS4” and follow the directions on the screen.Products used in this guide Check out all of your options!.

Make sure that your PS4 system is turned off, then proceed to boot the system by turning on the PlayStation by holding the power button until you hear another beep about seven to ten seconds later.

This option includes initializing, meaning that all data from the users on the system will be deleted.

Ps4 safe mode update#

There it will lead you to the steps on how to download the update, make sure that your USB flash drive has 460 MB or more and that you only have one version of the update downloaded to the flash drive.

Ps4 safe mode software#

You’ll need a computer connected to the internet, a USB flash drive with 460 MB or more free space, and a USB charging cable for the controller.įor all options, you’ll need to log into to download the latest software version (7.02) required for your PS4. Keep in mind that this is for the PS4 but may work for all PS consoles.The following suggestions will hopefully help you with this loop, so that you won’t have to send it off to Sony to get fixed. Usually clicking on one of the eight options would let you continue with your fun but sometimes inconveniently, no matter what option you have clicked, the system keeps returning to safe mode. Over winter break, I encountered what many in the PlayStation community have now labeled as the “safe mode death loop.” For those unfamiliar, “safe mode allows you to start your PS4 system with only the most basic functions active,” according to Sony.